Polycrystalline Synthetic Cutting Materials
PCD Carbide Backed Blanks and Cutting Tips
We offer the entire spectrum of different Polcrystalline Diamond (PCD) qualities, from ultra-fine to coarse-grade material. This means that the right quality is available for every PCD application.
Polycrystalline Synthetic Cutting Materials
Available PCD Qualities
| Grade | Average grain size | Total thickness [mm] | Round blank size [mm] | |
|---|---|---|---|---|
| CXF01 | submicron | 1 µm | 1,6 / 2,0 / 3,2 | 60 |
| CSF02 | fine-standard | 2 µm | 1,6 / 2,0 / 3,2 | 60 |
| CFM05 | medium-fine | 5 µm | 1,6 / 2,0 / 3,2 | 60 |
| CSM10 | medium standard | 10 µm | 1,6 / 2,0 / 3,2 | 60 |
| CXM10 | medium multimodal | 10 µm extra | 1,6 / 2,0 / 3,2 | 60 |
| CGM253 | multimodal | 3+25 µm | 1,6 / 2,0 / 3,2 | 60 |
| CSC25 | coarse-standard | 25 µm | 1,6 / 2,0 / 3,2 | 60 |
| CGM302 | coarse bi-modal | 2+30 µm | 1,6 / 2,0 / 3,2 | 60 |
On request, some of the standard qualities are also available in 1.0 mm total thickness (0.3 - 0.5 mm diamond layer). We produce pre-cut tips according to customer specifications, cut by laser, with reworked flanks. Actual diameter of the round blank: 59.5 mm
Data & facts
| Full round blank diameter | +0,0/-0,5 mm |
| Total thickness | 1,6/2,0/3,2 mm (+/- 0,05) |
| PCD layer thickness | +/- 0,15 mm |
| Parallelism | +/- 0,05 mm |
| PCD surface | polished or lapped |
| Tolerance cuts | +/- 0,1 mm |
Any questions? We have the answers for you.
At our comprehensive warehouse, we keep a large number of different cutting material qualities and grit sizes ready for you on stock and are able to supply the common products on short notice.
Needless to say that we have an open ear for individual inquiries and are happy to help you with competent advice.